Skip to main content
Integrations & Data

Troubleshooting your data

Written By Martijn Russchen

Last updated 26 days ago

Why an activity has no TSS or training load

If an activity shows no TSS (training load) or empty training zones, it's almost always about how the activity reached Intervals.icu, not a bug. TSS and zone analysis need the full per-second power or heart-rate streams from the original .fit file:

  • Summary-only sources (Fitbit, Google, Whoop) hand over only totals (duration, distance, average HR), so there is nothing to compute TSS from.

  • Strava-only activities cannot be read at all (Strava API terms), so they carry no load.

  • No power or heart rate recorded — a ride without a power meter or an HR strap has no intensity signal to turn into TSS.

The fix in every case is to get the full recording to us: connect Wahoo or Hammerhead directly in IntervalCoach, sync your device straight to Intervals.icu, or upload the original file. See Missing or zero data below for exactly how, per source.

Missing or zero data

Data quality depends on how your sessions reach us:

  • Best: a direct connection or a direct device sync. Wahoo and Hammerhead Karoo connected in IntervalCoach, or Garmin, Wahoo, Coros and Zwift syncing straight to Intervals.icu, deliver the original file with full power, HR, cadence, and GPS.

  • Strava sync: Strava's API terms prohibit Intervals.icu from sharing Strava-sourced activity data with apps like IntervalCoach. If your activities only reach ICU via Strava, we can't read them. Fix: connect your device directly to Intervals.icu (keep Strava connected too) — ICU replaces the Strava copy with the original, no duplicates. The "Import All Strava Data" button also works (those imports aren't restricted).

  • Summary only — Fitbit, Google, Whoop: these APIs provide only summary data (duration, distance, average HR). TSS and zone analysis need per-second streams, so these show minimal metrics.

  • Apple Watch: sync your workouts through the IntervalCoach iOS app — turn on the Apple Health integration (app → Settings → Apple Health) and your Apple Watch activities are pulled in directly, no third-party export tools needed.

If a session that came in through Intervals.icu looks wrong, check its Intervals.icu activity page first: for those sessions, IntervalCoach can only use what Intervals.icu receives.

Why did my fitness (CTL) jump after one ride?

Fitness (CTL) is a slow average of roughly your last six weeks of training, so even a long, hard ride normally lifts it by only a few points. If your fitness, fatigue (ATL) or weekly load jumped much more than that after one session, the most likely cause is that the same ride was counted twice. A big jump after one ride is not something to accept as normal.

This happens when one ride reaches IntervalCoach through two connections, for example once from Google Health or Apple Health and once from your bike computer or watch. Each connection delivers its own copy, and both copies carried training load. That was a bug on our side and it is fixed: overlapping copies of one ride now count once, and a copy that was deleted as a duplicate stays out of your fitness, also after we recalculate your training load.

How to spot a duplicate ride

  • Open your activities for the day of the jump. Two activities that start at the same time, or within a few minutes of each other, with about the same duration, are one ride recorded twice.

  • Often one copy has your device's name for the ride and the other a generic name, or one has power and the other only heart rate.

How we link overlapping copies

We match copies of the same session across your connections. A ride from a directly connected Wahoo, Hammerhead Karoo or Garmin is linked to its Intervals.icu copy and counted once. A Google Health or Apple Health workout that overlaps an activity already in your training log is not added a second time. You can keep all your connections switched on.

When to contact support

If you still see two copies of one ride, delete the one with less data. If it came in through Intervals.icu, delete it there. Your fitness corrects itself on the next sync. If your fitness still looks too high a day later, or you can't find a second copy, contact us in the chat with the date of the ride and we'll check it for you.

Why my Form (TSB) or weekly TSS looks too high — duplicate activities

If your Form (TSB) suddenly drops far too negative, or your weekly TSS / training load reads higher than what you actually did, the cause can be the same activity sitting in Intervals.icu twice. Intervals.icu normally merges two copies of the same activity automatically, so this is uncommon — it usually only happens when the two copies don't line up for that automatic match, most often because they have slightly different start times. Typical culprits: the same session recorded on two devices (e.g. a bike computer and a watch), a file uploaded by hand that also synced automatically, or the same ride imported twice.

Two copies double-count the load: a 192 TSS race becomes 384, which spikes your fatigue (ATL) and drags Form down. IntervalCoach reads straight from Intervals.icu, so the duplicate flows through to your dashboard. (A ride that reaches us both from a directly connected Wahoo or Karoo and through Intervals.icu is different: we recognise it as one session and count it once, so you can keep both connections.)

The fix is on the Intervals.icu side: open your activities for that day and look for two near-identical entries (same duration, same TSS, often one with the event name and one with a generic name). Keep the one with the full data (power, heart rate) and delete the other. Your Form and weekly TSS correct themselves on the next sync. To avoid duplicates going forward, make sure only one path delivers each workout into Intervals.icu. Recording the same session on two devices is fine (for example a virtual training app like MyWhoosh or Zwift plus a bike computer, so the ride also lands in Garmin Connect) — just disconnect one of the two uploads to Intervals.icu, in that app’s connection settings or on the Intervals.icu settings page, and let the copy with the best data be the one that arrives — see Missing or zero data above.

Wrong resting HR or HRV

These come straight from the service that measured them (Whoop, Apple Health, Google Health, or your Intervals.icu wellness data): IntervalCoach reads, it doesn't calculate. If values that come through Intervals.icu look off: (1) verify them on the Intervals.icu Wellness page, (2) check your device is measuring RHR during sleep, (3) for third-party apps (HRV4Training, Oura) confirm the scale matches what ICU expects. Once correct in Intervals.icu, they're correct here.

A wrong power record (spike) in my power curve

A power meter sometimes records a spike, for example 1,000 W for a few seconds, that you never actually rode. It then shows up as your best 5-second or 1-minute power. IntervalCoach reads your power curve from Intervals.icu, so the fix is there, and IntervalCoach follows automatically:

  1. Find the ride: on your Intervals.icu power curve, the point for that duration shows which ride it came from.

  2. Fix the spike: open that ride, go to Actions → Edit data, scroll to the moment of the spike and replace the value with a realistic one. The rest of the ride keeps its power.

  3. Or drop the whole file: if the ride's power is wrong throughout, Actions → Settings → Ignore power removes power from that ride entirely.

A short spike only affects your sprint values. Your FTP and training zones are not based on a 5-second peak.

Running emails when you didn't run

If you get "Analysis: Running" emails for activities that weren't runs, your watch is auto-detecting movement and syncing it to Intervals.icu as a run. Fix it by turning off movement auto-detection on your watch (Garmin: Activity Tracking → Auto Activity Start; Apple Watch: Workout → Auto-detect Workouts), and deleting or reclassifying the activity in Intervals.icu. IntervalCoach analyses whatever the sport is labelled as in ICU.

Does IntervalCoach change my activity descriptions?

By default, no. Writing post-workout analysis back to your Intervals.icu activity description is off until you switch it on in Settings → Integrations ("Sync analysis to Intervals.icu"). When it's on, IntervalCoach appends its analysis below a separator line, beneath whatever is already in the description — it never replaces your own notes. Prefer to keep descriptions untouched? Leave the toggle off. You can also delete the IntervalCoach section from any activity by hand and it won't be re-added for that activity. Because Intervals.icu can push descriptions on to Strava, this toggle also controls whether the analysis appears there.

Analysis not showing on Strava

Intervals.icu doesn't upload rides to Strava. It updates the Strava copy of a ride that your device or app already put there, so both connections have to stay on:

  1. Your device uploads to Strava directly, for example Garmin Connect → Strava. Leave this connection on.

  2. In Intervals.icu, Settings → Strava: turn on "Keep non-Strava activities in sync with Strava" and "Update Strava name and description".

Intervals.icu links the two copies of a ride automatically. When a single ride is missing the analysis on Strava, that link usually didn't happen. You can spot it when the ride has a different name in Intervals.icu than on Strava.

To fix one ride:

  1. In Intervals.icu, go to Settings → Strava and click Download old data for that day. Intervals.icu fetches the Strava copy again and links it.

  2. Open the ride in Intervals.icu, change one character in the description, and save. Intervals.icu then sends the description to Strava. Or contact us and we'll resend it for you.